Products

Industrial Floorings And Toppings
Click to download PDF version

PRODUCT FEATURES USES COVERAGE/
DOSAGE
SPECIFICATION/
TEST METHOD
PACKING
CAPCRETE Polymer modified cement based trowel able flooring compound for re-surfacing and reinstatement of large areas of concrete. Provides hard wearing surface to new or old concrete floors in wear houses, factories etc with high abrasion resistance, high impact and non-dusting. 23.0 kg/m2 at 10 mm thickness. ASTM C-109 25 kg bag.
CAP DRY SHAKE HARDENER Pre-blended dry shake surface hardener consisting hydraulic binder and high quality inert mineral aggregate. To provide continuous protection to concrete floors against wear, impact and abrasion.  3.0 kg/m2 for light duty5.0 kg/m2 for medium duty7.0 kg/m2 for heavy duty  ASTM C-109BS 8204 PART-2  25 kg bag. 
CAP LEVEL TOP Pre-blended, free flowing, self leveling cementitious floor leveling compound.  To smooth out surface irregularities prior to laying final floor covering. Usually 7.0 m2/bagat 2mm thick.  ASTM C-109  25 kg bag. 
CAP
EMERY TOP
Emery based hard wearing monolithic surfacing  As a shake on topping for flooring areas where high abrasion and impact resistance surface is required  4-8 kg/m2 depending on the level of protection required  ASTM C-109BS 8204 PART-2 25 kg bag. 
CAPOXY PRIME low V.O.C adhesion promoting primer As primer with epoxy base flooring, coating and repair products or stand alone sealer. 5 -7 m2 /liter  Tested by:ASTM C-882ASTM C-638ASTM C-883 1 liter pack4 litre pack
CAPOXY
PRIME-SB
solvented base primer and sealer as primer with epoxy base flooring,

coating and repair products 
6-8 m2/litre In house qualitystandards  1 liter pack4 litre pack
CAPOXY PRIME –SPL Epoxy base Low viscosity penetrating primer and sealer  For priming of damp or dry concrete Capoxy prime SPL can be applied within two days of pouring new concrete. 6- 8 m2 /liters  Tested by:ASTM C-882ASTM C-638ASTM C-883 1 liter pack4 litre pack
CAPOXY FLOOR-500 100% solid, solvent free high performance epoxy coating  High performance floor coating for industrial floors , laboratory and walk ways  3.5 to-4 m2 /liter  ASTM D-1308ASTM D-4541 4 liter kit20 liter kit
CAPOXY FLOOR -SL 100% solidSelf leveling, hard wearing floor topping Industrial floors where good abrasion and chemical resistance required 3m2/ 20 liter kit @ 4.8mm thickness  ASTM D-1308 ASTM D-4541 20 liter kit
CAPOXY FLOOR-310 Solvented, high performance epoxy resin floor and wall coating  Suitable to use in production assembly area, workshops and showrooms  4-4.5 m2/liter  ASTM D-1308ASTM D-4541 4 liter kit20 liter kit
CAPOXY MORTAR TA Heavy duty three component resin base mortar  To be use as monolithic surfacing /topping where high mechanical, chemical and abrasion resistance required 2.8 m2/ 30 kg kit@ 5mm thick  Tested toASTM C-722 30 kg Kit 
CAP
URETHANE-
VARNISH
2 Component polyurethane clear
with excellent gloss retention, clarity,
smoothed,tough and elastic and resistance for water and abrasion
"priming and sealing coat ,decorative
and protective topcoat interior or exterior on concrete
,masonery ,cement rendering,metaland wooden substrates "
liter/14 to 20 m2 In house quality
standards
4 liter kit
20 liter kit
CAP
URETHANE-
GLOSS
2 Component polyurethane top coat with excellent color retention,heavy duty coating over a wide range of substrates,tough, elastic high mechanical resistance to water,abrasion and solvents decorative and
protective top
coat interior or exterior tpo coat over
an epoxy mastic system on concrete,
masonery,cement rendering,metaland wooden substrates
liter/7.9 to 11.8 m3 In house quality
standards
4 liter kit
20 liter kit
CAP
URTHANE-
FLAT
2 Component polyurethane top coat
with excellent color retention ,tough,elastic,high mechanical resistance,resistance for water, abrasion and solvents
decorative and protective top
coat interior or exterior tpo coat over
an epoxy mastic system on concrete ,masonery,cement rendering,metaland wooden substrates
liter/7.9 to 11.8 m3 In house quality
standards
4 liter kit
20 liter kit
PU COATING elastomeric polyurthane 2 component system coating

consisting of MDI, POLYOL
waterproofing of roof teraces, decks, alternative to roofing membrane ,

vehicular traffic , wet areas and tennis courts
coating thickness 0.125-0.5 inchesor 125-500 mils ASTM D-412

ASTM D-792
220 kg polyol drum250 kg MDI drum

Follow us on

Facebook Account Twitter Account Instagram Account
Youtube Account Google+ Account LinkedIn Account
 
© Copyrights 2017 - www.ahliachemicals.com