Products

Damp Proofing And Water Proofing
Click to download PDF version

PRODUCT FEATURES USES COVERAGE/
DOSAGE
SPECIFICATION/
TEST METHOD
PACKING
CAPSEAL A high quality rubberized black asphalt paint which gives high gloss finish. Effectively used in damp-proofing, water-proofing and corrosion prevention of above and below grade metal or masonry structure. 0.3 to 0.5 kg/m2 per coat.  BS 6949  15 kg pail200 kg barrel
CAPSEAL SPL Thixotropic, superior quality rubber latex reinforced bitumen emulsion. The high rubber content resists cracking, blistering, alligatoring etc. and provides rugged durable protection to coating. Highly resistant to weathering, atmospheric pollution and soil chemicals. Used on sub-structural and foundation surfaces of above or below grade. As a protective lining for gutters, pipes carrying acidic or alkaline effluents.  0.5 to 1.0 kg/m2 per coat.  BS 6949MPW Spec. Clause517.03 15 kg pail200 kg barrel
CAPCOAT A bituminous emulsion of brush able consistency made from refined asphalt, rubber and reinforcing fiber. Quick drying compound that provides a tough flexible film. Used as an economical coating for re-surfacing asphalt and built up roofs. As a protective coating for masonry and metal surfaces. It is frequently used along with open mesh glass mat as a cold process roofing and resurfacing system.  0.5 to 1.0 kg/m2 per coat.  ASTM D-1227  15 kg pail200 kg barrel
CAPCOAT SPL A heavy bodied brush consistency, homogenous black bituminous coating, loaded with high percentage of rubber and special long reinforcing fiber gives the surface long lasting water proof protection. Retains significant elasticity and superior bonds to substrate. Can be applied efficiently and effectively.  Used as a protective coating for roof. Often used as rust preventive coating on metal surfaces and damp-proofing for masonry walls and foundations.  0.5 to 1.0 kg per m2 per coat.  ASTM D-1227  15 kg pail200 kg barrel
SEALCOAT  Non fibrated emulsified bitumen protective coating  Used as protective coating for built up roofs and other exposed surface  0.5-1.0 kg/m2 Per coat  ASTM D-1227 Type 3 class 2 15 kg pail200 kg barrel
CAP-PRIME A bitumen emulsion of brush able consistency made from refined asphalt. It adheres well to almost all surfaces and dries to touch in about 1 to 4 hours. Used to prime metal, concrete roof decks etc. before installation of bituminous materials. 0.15 to 0.25 kg/m2 per coat.  In house quality standards  15 kg pail200 kg barrel
CAP
SOLVENT
A high grade, brush able or spray able paint like product made from selected high quality asphalt and petroleum solvent. Gives high gloss and economical for use. Used to prime metal, concrete roof decks etc. before installation of bituminous materials. 0.2 to 0.4 kg/m2 per coat.  ASTM D-41 15 kg pail200 kg barrel
PRIME GUARD Liquid asphalt primer made from refinedasphalt, adhesionpromoting additive and quick evaporating solvent  For priming and sealing bare concrete prior to application of bituminous material and felt.  0.2 to 0.4 kg/m2 per coat.  In house quality standards 15 kg pail180 kg barrel
CAPSILVER A proprietary mixture of special asphalts, petroleum solvent, high grade aluminum fines to provide a highly reflective coating. Its metallic brilliance reflects sun rays and protects the roof from destructive overheating and actinic deterioration.  Provides a most durable and least expensive way to protect built up roofs, house tops etc. It is a beautifier and rust inhibitor for the metal surfaces. Extends life of modified bitumen roofs. 0.2 to 0.4 kg/m2 In house quality standards 15 kg pail200 kg barrel
AC-500 Acrylic polymer modified water proof coating which cures a highly flexible, tough, seamless membrane for the protection of all kinds of roofs, can be used with or without reinforcement  For waterproofing of roof walls and concrete structure  0.8-1.0 kg/m2 per coat  ASTM D-1076 ASTM D-412ASTM C-297ASTM D-822 15 kg pail 250 kg drum
CAP HYDRO SEAL Two component polymer modified flexible cementitious Waterproofing system  As a waterproof lining for water retaining structures , protecting concrete against carbonation and chloride ion attcack  13 m2 at 1 mmthickness /kit  ASTM C-836ASTM D-412 20 kg kit
AQUAFIN IC Crystalline waterproofing slurry As a waterproofing for drinking water tanks retaining walls, foundations, water treatment plants 1.5 Kg/m2 at 0.8 mmthickness DIN 4030 25 kg bag
CAP TAR EPOXY two component epoxy

coal tar epoxy
for protection of steel iron and concrete 5m2/litre @

140 MDFT
BS 1070

BS 3900
15 litre kit
PU COATING elastomeric polyurthane 2 component system coating

consisting of MDI, POLYOL
waterproofing of roof teraces, decks, alternative to roofing membrane ,

vehicular traffic , wet areas and tennis courts
coating thickness 0.125-0.5 inchesor 125-500 mils ASTM D-412

ASTM D-792
220 kg polyol drum250 kg MDI drum

Follow us on

Facebook Account Twitter Account Instagram Account
Youtube Account Google+ Account LinkedIn Account
 
© Copyrights 2017 - www.ahliachemicals.com